Flake Ice Machine Evaporator

A: Stainless Steel Flake Ice Machine Evaporator

 

The evaporator of the flake ice maker is made of stainless steel 316 that has been chrome-plated. When compared to similar industry equipment, the internal spiral groove structural design and the V-shaped groove welding technology lower energy consumption by more than 5% to 8%.

B: Cutting-edge, contemporary technology

 

We adjusted the temperature of the annealing furnace for the flake ice machine between 950°C and 1200°C in order to relieve the internal stress of the steel and cause the steel of the ice evaporator to expand in accordance with the principle of thermal expansion and contraction. After that, the ice evaporator is baked for over twenty-four hours in the annealing oven. We guarantee that the evaporator of the flake ice maker won't break down for over 20 years.

C: Superb Evaporator-equipped Flake Ice Makers

 

The inside paint covering of the flake ice machine stops leaks and offers a sturdy foundation for the runner's welding point.

D: Components of flake ice maker evaporator

 

Germany, the EU, and Japan import every component they require.

①Germany was the importer of the original compressor.

② Schneider purchased electrical parts in France.

③ Emerson purchased refrigeration components from the US.

④SKF imported the bearings from Japan.

①Luyang produces between 0.3T to 300T of ice daily;

②Effective Cooling Techniques:

Other options include evaporation cooling, water cooling, and air cooling, depending on the needs of the client.

-If there are enough water supplies, choose a water-cooled alternative;

-But use air conditioning instead.

If the power unit where you reside is expensive, you may choose to use evaporative cooling.

③Compressor: Depending on each client's unique situation, Luyang may recommend the best compressor brand. Customers are also free to alter as they see fit.

④ Power Supply:

There are two more variations: 3P/380V/50Hz and 3P/220V/60Hz.

-Any power source can be modified;

Above all, every ice maker must be single-phase and appropriate for both three-phase and industrial environments;

-Using a flake ice maker that produces 300 kg of ice each day is okay;

⑤ Material: To meet customer requirements, any machine part, including evaporators, pedestals, frame holders, etc., can be altered to use materials such hard chromium plating, SUS316, SUS304, or Q345.

⑥ The refrigerants in question are R404a, R22, R717, and R507, in that sequence.

⑦ Size: To accommodate the client's installation site, Luyang may modify the machine's size;

⑧ Custom Imprinted: Your company's logo or an existing concept may be embossed on the products.

★ Installation

When the water and electricity are connected, the small and medium-sized ice makers are ready to use. They are shipped together.

-We must keep different components of larger ice machines (such cooling towers and pipelines) isolated for ease of shipment in order to save clients money on shipping;

The machine must be put together, the water and power must be turned on, and the instructions or instructional video must be followed in order to be used, maintained, and installed. It is easily manageable by any refrigeration technician or electrician.

★ For technical concerns, phone help is available seven days a week.Our engineers are here to assist you at any time.

★ Local engineers conduct post-purchase servicing.However, the customer is responsible for paying for the visa, round-trip travel, accommodation, and installation.

-Free work for seven days in order to determine the cost.

-150 USD daily for seven days per person.

★ When clients' technicians come to our Luyang site in Shenzhen, we can give them free machine installation and operation training.

★ The machine has a 36-month lifespan.

★ Free and quick replacement of parts.

-The buyer will receive complimentary replacement parts in the event that a quality issue occurs during the guarantee term;

-After the warranty expires, parts will be billed at market value.

A: The flake ice machine courier service, which includes businesses like FEDEX, UPS, and DHL. Door-to-door service usually takes five to seven days to arrive.

B: Flying to the nearest airport typically takes three to four days.

C: Getting to the nearest sea port by boat usually takes ten to thirty days.

D: We utilize the standard export wooden container for each flake ice machine, depending on the needs of different clients.

A: We are a professional refrigeration equipment manufacturer integrating design, manufacturing, sales and service. We can provide you with more comprehensive and reliable equipment and services.

B:We have many overseas branches that can provide you with reliable after-sales service (including on-site service and remote guidance service).

C:Our equipment adopts the latest design. Compared with traditional products, it has a more compact volume, more efficient output and more complete supporting facilities, which greatly reduces the cost of equipment maintenance and extends the service life of the equipment.

D:Our products use better materials, for example, the evaporator coil of the quick-freezer, we use more reliable and pressure-bearing stainless steel tubes, even copper tubes; For another example, our evaporative condenser, of the same model, uses thicker pipes and guard plates, so it has a heavier weight.

E:We are a factory designed, manufactured and sold by ourselves. We can achieve lower prices.

The full-service manufacturer Shenzhen Luyang Ice Machine Equipment Co., Ltd. focuses on the design, development, production, and marketing of ice machines. With over 100 employees, including more than 30 salespeople and over 20 members of the technical research and development design team, the company has had steady growth over the last ten years.

We continuously support independent product development, a systematic approach to quality control, and a management staff that is well-organized. With roots in the Pearl River Delta, Shenzhen Luyang Ice Machine Equipment Co., Ltd. wants to grow into a great business by interacting with people both locally and beyond.

The company's extensive after-sales support staff uses feedback, information sharing with customers, and long-term customer follow-up studies into product usage to improve the ice maker's quality and lower maintenance and post-purchase costs. This is in addition to maintaining production control and rigorously adhering to the ISO9001:2008 quality management system.

Hot Tags: flake ice machine evaporator, China flake ice machine evaporator manufacturers, suppliers, factory, condensing unit, Chrome Plated Flake Ice Evaporator, Water Chiller with Condensing Unit, plate ice machine, Snow Block Ice Maker, direct cooling block ice machine