Automatic Small Ice Cube Machine

 

A: High Capacity

The capacity ranges from 100 kg to 30 tons per day. Even in hot temperatures, its production is steady and can reach 90% to 95%. Its production may rise from 100% to 130% when the water temperature is below 25°C and the surrounding air temperature is below 20°C.

B: Sanitation and Safety

The ice cube is safe for human consumption thanks to its structural design, smart frame, and water system with SUS304.

C: Reduced Power Usage

Extremely energy-efficient-just 75–80 KW/H are needed to make one ton of ice. It needs 70–80 KWH/Ton only when the temperature falls below 23°C. It utilizes more than 30% less energy than conventional small ice cube machines, which typically use 150–165 KWH/Ton.

 

D: Automated Procedure

The Siemens PLC with Touch Screen Control System enables features such as an automated start and stop timing. Once the ice bins are full, no more ice is produced. It's simple to configure all the parameters and check the running history.

E: Design that minimizes workload

A strange outlet for ice. Ice naturally separates. Because it is not need to be transported by hand, the ice is hygienic and clean. In the meanwhile, wrapping the ice in plastic bags is a smart approach to preserve it.

Important characteristics

 

1. The following sizes of ice cubes are available: 22*22*22 mm, 29*29*22 mm, 38*38*22 mm, or custom.

2. Refrigerant: R22 or R404A; compressor brand: Bitzer or Frascold; cooling method: air or water.

3. Power Supply: Voltage: 380V/3P/50Hz (non-standard voltage requires a separate unit configuration).

4. The temperature is 32 °C outside, 20 °C in the water supply, 40 °C in the condensing system, and -10 °C in the evaporation system.

5. Note: The amount of ice generated depends on the temperature of the surrounding air and the water supply.

6. Any technological changes will be communicated further; the final interpretation of the aforementioned parameter is in Luyang.

① Luyang generates between 100 kg and 300 tons of cube ice daily;

② Successful Cooling Strategies:

Depending on the customer's needs, other possibilities include air cooling, water cooling, and evaporation cooling.

-Select a water-cooled substitute if there are sufficient water supplies;

-But instead, use air conditioning.

You can decide to use evaporative cooling if the power unit where you live is pricey.

③ Compressor: Luyang may suggest the appropriate compressor brand based on the particular circumstances of each client. Customers are also free to alter as they see fit.

④ Energy Source:

Other versions are 3P/220V/60Hz and 3P/380V/50Hz.

-Any power source is adaptable;

Most importantly, each ice maker needs to be single-phase and suitable for both industrial and three-phase settings;

-It's acceptable to use a cube ice maker that generates 300 kg of ice daily;

⑤ Material: Any machine part, such as evaporators, pedestals, frame holders, etc., can be modified to use materials such hard chromium plating, SUS316, SUS304, or Q345 in order to satisfy customer needs.

⑥ R404a, R22, R717, and R507 are the refrigerants in question, in that order.

⑦ Dimensions: Luyang may alter the machine's dimensions to fit the client's installation location;

⑧ Custom Imprinted: The products may be embossed with your company's logo or an existing concept.

★ Setup

1. User installation:

Before being shipped, the machine will be thoroughly inspected and installed, and all required spare parts, an operation manual, and a CD are included to help with the installation procedure.

2. Our engineers implemented the following:

(1) You can send an engineer to help with the installation, train your employees, and offer technical assistance. The end-user pays for our engineer's lodging and travel expenses.

(2) The tools, water, electricity, and installation site should be prepared before our engineer arrives at your location. A tool list will be given to you when the equipment is delivered.

(3) Every replacement part is supplied in accordance with our specifications. The buyer is responsible for paying for any shortfalls in parts during installation that arise from the actual installation site, such as water pipelines.

(4) For large projects, two to three workers are needed to help with installation.

The small and medium-sized ice makers are ready to use once the electricity and water are connected. Together, they are shipped.

-To save customers money on shipping, we must keep various parts of larger ice machines (such cooling towers and pipelines) apart for convenience of transportation;

For the machine to be used, maintained, and installed, it must be assembled, the water and power must be turned on, and the instructions or instructional video must be followed. Any electrician or refrigeration specialist can handle it with ease.

★ Phone support is provided seven days a week for technical issues.Our engineers are here to help whenever you need them.

★ Post-purchase servicing is handled by local engineers.However, the cost of the visa, round-trip airfare, lodging, and installation falls on the consumer.

-Free labor for seven days to calculate the price.

-150 USD daily for seven days per person.

★ We can provide free machine installation and operation training to clients' technicians when they visit our Luyang facility in Shenzhen.

★ The machine comes with a 36-month warranty;

★ Free and quick part replacement;

-The buyer will receive complimentary replacement parts in the event that a quality issue arises during the guarantee term;

-Parts will be charged at market value following the warranty's expiration.

A: The courier service for cube ice machines, which comprises companies like DHL, UPS, and FEDEX. It typically takes five to seven days for door-to-door service to arrive.

B: It usually takes three to four days to fly to the closest airport.

C: It often takes ten to thirty days to travel by boat to the closest sea port.

D: Depending on the requirements of various clients, we use the standard export wooden container for every flake ice machine.

A: Design, manufacturing, sales, and maintenance are all integrated by our knowledgeable refrigeration equipment company. We are able to provide you with more extensive and dependable equipment and services.

B: We can offer you dependable after-sales support, including on-site and remote guiding services, thanks to our numerous international branches.

C: We utilize the newest equipment design. Its more compact capacity, more effective manufacturing, and more extensive supporting facilities significantly lower equipment maintenance costs and increase equipment service life as compared to traditional items.

D: Better materials are used to make our products. For instance, the quick-freezer's evaporator coil is made of stainless steel or copper tubes, which are more dependable and pressure-resistant. For instance, because its pipes and guard plates are thicker, our evaporative condenser of the same model weighs more.

E: We are a factory that creates, produces, and markets its own products. Spending can be reduced.